What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 03.07.2025 03:22

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

eight

One

There are two important concepts here.

What’s going on with measles, bird flu, and COVID? Here’s a guide to the latest. - The Boston Globe

At one ohm, the resistor has a maximum of 1 watt power.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

[image of Common-mode choke]

Drinking coffee could help you age better, according to this Harvard study. - Stewartville Star

The bolt then partially travels down the line to your home.

The MOV will conduct when the voltage exceeds 50% of line voltage.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Lucas: The Response - University of North Carolina Athletics - University of North Carolina Athletics

nine

what exactly is a ‘surge’ protector?

This is where this question deviates from being a 'generic' question, and becomes more specific.

Experimental cholesterol pill cuts heart attack risk with 'convenient' once-daily dose - AOL.com

He then describes Rainy Season and Lightning.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

a photo is worth a thousand words.

As a teacher, what's the most inappropriate experience you've had with a student?

An AC voltage/ current source, and an ac inductive load.

But… the neutral is now “floating” because of the 1 ohm resistance.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Weight stigma isn’t just cruel — it makes losing weight harder - CNN

This is where the MOV conducts again, and dissipated the energy.

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Top prospects for 2025 Draft arrive in Buffalo for Scouting Combine - NHL.com

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

It seems Mohan does not understand the difference between a comment and an Answer.

but I think this circuit , shows a few more pieces.

Should Kick Streaming buy TikTok so that TikTok can allow jerks to not get banned but instead promoted due to poor behavior like is the case with Kick already?

In schematic diagrams this is the symbol for a fuse:

This one hit behind the barn.

(Dc diagram shown, AC is similar).

3 Subtle Signs Your Relationship Is Near Its End — By A Psychologist - Forbes

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Because the load is inductive, the current lags the voltage.(by a bit).

So, the voltage could go up to 500 volts, and the fuse will not open up.

Elden Ring Nightreign maintenance makes matchmaking less of a headache - Eurogamer

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Why is it important for Hollywood celebrities to come out against Trump?

For this case there are devices called Metal oxide varistors (MOV).

But it can get overloaded, and no longer works.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

How do military families handle communication when a service member is injured overseas?

so, what happens?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

These devices are installed between the “hot” and “neutral” and protective ground.

MAGA activist Steve Bannon claims Elon Musk got physical with Scott Bessent, reveals all details - The Economic Times

Now when you have a certain ac resistance, then a current flows in a loop.

The other is “what does a “fuse” do?”

A fuse is a non-resetable over current circuit protector.

Diddy Bashes Courtroom Artist for Making Him Look Like a ‘Koala’ - The Daily Beast

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

One is “what exactly is in a ‘surge protector’ ? ”

He then describes the function of a fuse.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Can the fuse protect the electronic devices from lightning instead of a surge protector.

First Sentence:

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

A circuit breaker is similar, but is resettable.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Edit 2024–10.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This is 'the assistant's answer'

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

I post the exact comment here.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

the problem then depends on "how fast does the fuse operate?".

This device then solves the entire problem.

2024–10–10[John johnson John Johnson ]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

It also is a device that limits the change in current flow.

2024–10–16 [ OO OLAOYE OYEBODE ]

Barnstars:

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

What is lightning?

[old diagram got deleted by accident]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

but this device (an Inductor) … impedes the rapid changes in the current.

Upvotes:

There are three different concepts here that are getting confused.

At least they know the answer if they wanted it.

What does a fuse do?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

The third is lightning and “how it gets conducted into a home.”

He then asserts :

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Here is a simplified AC power diagram.